Product Description
ESP32 CAM WiFi Bluetooth Module:
Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras with built-in flash
Support for images WiFI upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA AP working mode
Support Smart Config/AirKiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
Support secondary development
Note: 1.Please ensure that the module input power is at least 5V 2A, otherwise the image will unstable. 2.ESP32 GPIO32 pin controls camera power. When the camera is working, please pull GPIO32 low. 3.Since IO0 is connected to the camera XCLK, please leave IO0 floating when using it. Do not connect high and low level. 4.The factory has the default firmware, no additional download is available. Please handle it carefully if you need to re-burn other firmware.
HC--SR501 Body Sensor Module: Operating voltage range: DC 4.5-20V Quiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger) Delay time: 0.3-200S(adjustable) the range is (0.xx second to tens of second) Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds Angle Sensor: <100 ° cone angle Lens size
Package include: 3 x ESP32-CAM Module 3 x HC-SR501 Infrared IR Sensor 1 x 20cm 10pin Female-Female Jumper Wires 1 x 20cm 10pin Female-Male Jumper Wires